The Holosun SCS-P10-GR is a dedicated open reflex green dot sight 

built specifically for CZ P-10 OR and CZ Shadow 2 OR pistols. It sits ultra-low on the slide without adapter plates, giving a clean co-witness with factory iron sights and a very natural point of aim. The result is a compact, fast optic that feels like part of the pistol, not an add‑on.

Key technical specification Holosun SCS-P10-GR

What makes it different from other red dots

Most open reflex sights use a universal RMR footprint and need an adapter plate on CZ slides, which adds height and one more mechanical interface that can move or loosen. The SCS-P10-GR bolts directly into the factory CZ cut, removing the plate completely and reducing bore axis by a few millimetres. That means less offset, more repeatable zero, and a dot that naturally lines up with your irons.

Compared to titanium models like the 508T, the SCS-P10-GR uses hard‑anodized aluminium to keep weight and cost down while still being more than tough enough for duty, sport, and carry use. Instead of a big “do‑everything” window, its slightly smaller 14 × 21 mm window is optimised for how CZ pistols present, giving a low profile without sacrificing practical field of view.

Reticle and power in real use

The 2 MOA green dot is ideal for precise shots at 25 m and beyond, while the 32 MOA circle gives very fast target acquisition in close‑quarters; the circle‑dot mode lets you use both at once depending on distance. Green is easier for the eye to pick up in bright daylight and tends to bloom less than red, so the dot stays crisp even in strong sun.

The Solar Failsafe system and motion‑sensing electronics mean you can leave the sight on and trust it: the solar cell reduces battery drain in daylight, and the unit goes to sleep when the pistol is still, then wakes instantly with movement. This approach has already been proven across Holosun’s pistol optics line and is one of the brand’s main advantages over traditional always‑on dots.​

Installation and maintenance

On a CZ P‑10 OR or Shadow 2 OR, installation is simply removing the cover plate and bolting the SCS-P10-GR directly to the slide with the supplied screws and key—no shims, no plates, no fitting work. Zeroing is straightforward: 1 MOA clicks at 25 m give fine enough control for both range work and match use. Routine care is limited to occasionally wiping the lens with a microfiber cloth and changing the CR1632 battery from the side tray when needed, without removing the optic from the slide.

Order the Holosun SCS-P10-GR from Professional Optics Split—EU-based inventory, transparent pricing, and expert technical guidance for dedicated CZ platform precision performance.